This roofing glossary explains the words homeowners hear most often from roofers and insurance adjusters in Mid-Missouri. Use it to read an estimate, follow an insurance claim, or understand an inspection report. Each term links to the service or guide where it matters most.
Roof structure
- Decking (sheathing): The plywood or OSB boards that form the base of the roof. Shingles are nailed to the decking. Damaged decking is replaced during roof replacement.
- Rafters and trusses: The framing that supports the decking.
- Pitch: How steep a roof is, written as rise over 12 inches of run, such as 6/12.
- Square: 100 square feet of roof surface. Roofers price materials and labor by the square.
- Ridge: The top horizontal line where two roof planes meet.
- Valley: The angled channel where two roof planes meet and water flows together.
- Eave: The lower edge of the roof that overhangs the wall.
- Rake: The sloped edge of a gable roof.
- Dormer: A structure that projects from a sloped roof, usually containing a window.
Materials
- Architectural shingles: Thicker, multi-layer asphalt shingles with a dimensional look. The most common choice in Mid-Missouri.
- Three-tab shingles: Older, flatter, single-layer asphalt shingles.
- Impact-resistant (Class 4) shingles: Shingles that meet the highest impact rating for hail resistance. See shingle vs. metal roofs.
- Granules: The ceramic-coated grit on shingles that protects the asphalt from sun. Granule loss is a sign of aging or hail damage.
- Underlayment: A water-resistant layer installed over the decking and under the shingles.
- Ice and water shield: A self-adhering membrane installed at eaves and valleys to block water from ice dams and wind-driven rain.
- Standing seam metal: Metal roof panels with raised, interlocking seams and hidden fasteners.
- GoNano: A spray-applied coating that protects aging shingles. See GoNano roof coating explained.
Flashing and ventilation
- Flashing: Metal pieces that seal joints around chimneys, walls, skylights, and valleys. Failed flashing is a common leak source handled by roof repair.
- Drip edge: Metal trim along eaves and rakes that directs water into the gutters.
- Pipe boot: A rubber or metal collar that seals around plumbing vent pipes.
- Ridge vent: A vent along the ridge that lets hot, moist air escape the attic.
- Soffit vent: Vents under the eaves that bring fresh air into the attic.
Damage and inspection terms
- Hail bruise: A soft spot on a shingle where hail crushed the mat, often with granule loss. Usually visible only up close during a roof inspection.
- Ice dam: A ridge of ice at the eaves that traps melting snow and forces water under shingles.
- Tarping: Temporary waterproof covering placed over storm damage until repairs are made. See storm damage.
- Tear-off: Removing the old roofing down to the decking before installing a new roof.
Insurance terms
- Adjuster: The insurance company's representative who inspects damage and writes the claim estimate.
- Scope of loss: The insurer's itemized list of covered work and amounts.
- Supplement: A request to add items the original scope missed.
- Deductible: The amount you pay under your policy before coverage applies.
- ACV (actual cash value): Coverage that pays the depreciated value of the roof.
- RCV (replacement cost value): Coverage that pays the cost to replace the roof, often in two payments.
- Recoverable depreciation: The held-back portion of an RCV claim paid after the work is done. See How roof insurance claims work in Missouri.
Frequently asked questions
What is a roofing square?
A roofing square is 100 square feet of roof surface. Roofers measure and price roofs by the square, so a roof described as 25 squares covers about 2,500 square feet. The number of squares, together with pitch and material, is one of the main factors in the cost of a roof replacement.
What is roof flashing?
Roof flashing is thin metal installed where the roof meets a wall, chimney, skylight, or valley. It directs water away from those joints so it cannot seep into the home. Bent, rusted, or poorly sealed flashing is one of the most common causes of roof leaks and is usually replaced during re-roofing.
What is the difference between ACV and RCV?
ACV, or actual cash value, pays the depreciated value of your roof, so older roofs receive less. RCV, or replacement cost value, pays what it costs to replace the roof with similar materials, usually in two payments. Both subtract your deductible. Your policy declarations page shows which type of coverage applies to your roof.